Table of Contents
ShockWatch 2 and ShockWatch Self-stick damage indicator Labels are attached to shipping containers and give a visual cue as to whether a shipment has been dropped or damaged. Since Shockwatch 2 is less expensive than shockwatch labels that don’t need to be activated during shipping, most users apply Shockwatch 2 25G and Shockwatch 2 50G to their shipments. Shippers may be held more accountable in the event of 3-axis limitations.
What is ShockWatch 2? What is ShockWatch sticker?
ShockWatch is a brand name for impact indicators, drop shipping damage indicators and shock indicators. ShockWatch devices mechanically activated glow bright red in the event of an impact. The Shockwatch 2 Impact Indicators, a go/no-go directional vertical response, were introduced by Spotsee in 2014 to address activation during shipment.
What’s the difference between ShockWatch and ShockWatch 2?
Before ShockWatch 2 launched, every single ShockWatch 1 label could not conquer the “activation challenge during shipment” due to the traits of the product. Once the tube of ShockWatch is produced, it is under detecting mode until an impact exceeds set acceleration. Enlarging the final packaging size is the best way to decrease the risk of damage as much as possible.
ShockWatch 2 completely conquered the challenge which is a convenience for both distributors and users; however, because of its convenience, some concerns regarding impact direction detection go here. A fun fact is that some users have started to use Shockwatch 2 for their shipments while some users insist on using the Shockwatch label in their supply chain. What is the reason for it?
Users in some countries may refer to ShockWatch as a shock indicator. You will encounter distinct brand names in the global market, like Impact Label compatible with ShockWatch, or Impact Indicator 2 compatible with ShockWatch 2.
 alternative solution to ShockWatch |  alternative solution to ShockWatch 2 |
How Do Shockwatch Labels and ShockWatch 2 Works?
Before we go further into the subject, we need to comprehensively understand how they work differently when detecting impact.
Shockwatch labels devices that turn bright red to indicate impact occurred. The core impact sensor is a glass tube with red water. When an impact force exceeds the threshold, the red water inside rushes out and dies the coating, which comes red visual.
As for Shockwatch 2, the inside center is a red plastic block that weighs a certain amount attached to two plastic springs and is held in place by an on/off switch. A certain amount of weight is moved by the red plastic block when the switch is removed and impacted.
As you can see from the explanation above, there are two methods for determining impact force. Shockwatch 2 impact detection is vertical, meaning that it can detect impacts from the front, back, left, or up, depending on which direction is applied. Will the first shock label and Shockwatch 2 perform differently from one another? From the video demonstration, ShockWatch Label can detect nearly 3-axis impact force while ShockWatch 2 can detect 1-axis impact force.
How do you use Shockwatch2 indicator?
Due to limitations in the direction of impact force, we should typically apply three or six shockwatch2 to cargo for three axes to 360-degree monitoring as shown below; however, this comes at the expense of increased costs. Fewer limitations in impact direction with the ShockWatch 1, typically applying 1 piece to the carton/crate is enough.
Buy Shockwatch 2 Price
Spotsee ShockWatch 2 is more readily delivered intact than the Shockwatch Label, and retail costs less. Shockwatch 2 is at least 3 pieces needed to achieve 360° detection while the Shockwatch label is one piece needed. If it’s for a larger shipment, users will need to put 6 pieces of ShockWatch 2 to achieve accurate detection.
Spotsee ShockWatch 2 impact indicator costs US $2 ~ $5 while Spotsee ShockWatch label costs US $3 ~ $5. The price range depends on the purchase quantity and trait of your company, i.e. distributor or end-user. In view of cost, for the same shipment, putting ShockWatch 2 costs US $2 x 3 = US $6 while ShockWatch label costs US $3 x 1 = US $3. Workers will need to re-do placing the indicator on shipment 3 times.
As a result, if cost is considered, the single unit price of ShockWatch 2 is lower, but in terms of usage, the actual total cost is not necessarily cheaper than ShockWatch. Even more, finding an alternative source with stable high quality, such as the WAN-YO Impact Label, the total cost will be even lower than a single ShockWatch label.
“Does ShockWatch 2 Help You?”
In conclusion, the choice between ShockWatch and ShockWatch 2 indicators for monitoring the integrity of shipments fundamentally hinges on the specific requirements and constraints of the shipper. ShockWatch 2, with its innovative design to overcome activation challenges during shipment and ability to detect vertical impacts, offers a convenient and efficient solution for distributors and users alike. However, its necessity for multiple units to achieve comprehensive 360-degree monitoring introduces complexity in terms of cost and application.
On the other hand, the original ShockWatch label, while potentially more susceptible to activation challenges, requires fewer units to provide a broad detection range, potentially offering a simpler and more cost-effective solution for certain shipping conditions. The choice between these two solutions should therefore be informed by a careful consideration of the nature of the goods being shipped, the shipping conditions, and the economic implications of each option.
Moreover, the availability of alternative solutions such as the WAN-YO Impact Label suggests that shippers have a range of options to choose from, each with its own set of benefits and drawbacks. Shippers need to weigh these options against their specific needs and constraints to select the most appropriate impact monitoring solution.
Ultimately, the goal is to ensure the integrity of the shipment while optimizing for cost and efficiency. Whether choosing ShockWatch, ShockWatch 2, or an alternative solution, the key is to understand the trade-offs involved and make an informed decision that best aligns with the shipper’s priorities and the nature of the goods being transported.
꧁LIMITED TIME OFFERS꧂
Wanna Test it yourself? WAN-YO provides FREE SAMPLES at the moment.
Click the button below for more details.
FAQ:
What does a Shockwatch 2 indicator do?
As packaging materials, some users believe that labels can physically lessen shipment damage; in reality, they are more likely to be a program. It has been demonstrated that the Shockwatch can reduce shipping damage by 40–60%. When the cargo shockwatch 2 indicator is illuminated, handlers focus their attention on the package. Put another way, the shockwatch2 reduces damage-related costs by acting as a visual deterrent to improper handling of your shipment and identifies whether products have been subjected to potentially harmful impacts while in transit.
How to tell if Shockwatch 2 has been activated?
The indicators change from clear to red to let you know if your product may have been mishandled and has been exposed to potentially harmful impacts during transit or storage.